CLEANING THE FUEL INJECTORS
Item number：EL0620
Description：
●Run the vehicle until the engine reaches normal operating temperature. shut the engine off
●Turn regulator on top of fuel injector cleaner to full open position(counterclockwise). leave the fitting on the end of the regulator open - do not connect shop air
●Close the shut - off valve at the bottom of the fuel injector cleaner. note : valve is off if it's turned all the way clockwise
●Remove top and regulator assembly from top of fuel injector cleaner. fill the container with one bottle of d - karbonizer. install top and regulator assembly again
●Connect the canister hose to a decarbonizing adapter
●Locate a manifold vacuum port(not ported vacuum) near the throttle body or carburetor. (this will distribute the decarbonizing solution more evenly)
●Connect the decarbonizer hose (with adapter) to the manifold vacuum port
●Start the engine. manually increase throttle to 1500 rpm while slowly opening the shut - off valve. (the engine will run rough and rpm will decrease. do not manually increase rpm)
●When the container is empty, turn the engine off
●Remove the adapter fitting from the engine. connect the vacuum hose
●Let the vehicle sit for at least 30 minutes to allow the solution to work on soft carbon deposits
●Test drive the vehicle for at least 15 miles to flush loosened carbon deposits out of the system
